$345
Promotion Dental 2 Slot Electrolytic Polishing Machine 056454
Description
Item number: 056454
110V Dental Double Slot Electrolytic Polishing Machine Electrolytic Polisher 056454
-
Product Overview
This machine is used for oral orthosis and repair specialty. After sandblasting, the machine is used to electropolish the stainless steel or cobalt alloy castings such as denture bracket, crown bridge and clamp ring, so that the surface finish of the castings can meet the requirements. Can also be used for special crafts metal casting processing. The machine is compact in design, beautiful in appearance, small in size, easy to place, using double cylindrical electrolytic cell, working at the same time, high efficiency, suitable for electrolytic polishing of castings at different angles. The cathode of the machine is cylindrical, the anode is V-shaped bracket, and the bracket is equipped with alligator clipping casting. The timing switch controls the electrolytic polishing time, and the electrolytic polishing current can be continuously controlled.
Product Parameters
Voltage: 110V
Power: 250W
Average anode current: Constant current adjustable
Dc output voltage: 0-20V
Time range: 0-15min
Electrolytic cell capacity: 800ML
Package size: 18.9"*13.78"*11.81" (48cm*35cm*30cm)
Net weight/Gross weight: 17.75LB(8.05KG) / 20.94LB(9.5KG)
Product Features & Advantages
1. Electrolytic Cells:
This machine is equipped with two electrolytic cells can be cleaned, two anodes, can be used at the same time, improve the efficiency, convenient and practical.
2. Vent Hole:
There are a large number of vents on the back of the machine, which can timely discharge the excess heat generated by the machine, prevent the temperature from being too high, and protect the machine.
3. Control Panel
LED digital tube display panel, intuitive display of time and current, simple and convenient operation, reading at a glance. The working time and current can be appropriately adjusted according to the size of the workpiece.
4. Support Legs
Four rubber support legs at the bottom, which are non-slip, wear-resistant, good silence, can ensure the stability of the machine, and can prevent water from entering the machine from the bottom.
- The output voltage of the machine is stable, controlled in the best range, and the current distribution is uniform, which can effectively avoid excessive electrolysis Influence on the size of the workpiece.
- It can effectively protect the electrolyte, prolong the service life of the electrolyte and reduce the cost.
- The current can be controlled to completely avoid the situation of frequent fuse burning and component burning caused by the rising current of traditional electrolysis machine.
- Select precision potentiometer, adjust current more accurately.
- With overload, overheating protection function, longer service life.
Operating Instructions
1. Pour the electrolyte into the electrolytic cell, and fix the electrolytic tile (cathode) by both ends of the electrolytic cell.
2. Clamp the bracket (workpiece) with the clamp (anode), the workpiece should be connected with copper wire hanging, put into the electrolyte, pay attention to not contact with the electrolytic tile.
3. Set the working time and adjust the current according to the size of the workpiece, it is recommended to use high current to quickly deal with the surface, and then reduce the current to increase the brightness of the mirror.
4. After setting time is over, take out the bracket (workpiece) and rinse it with water.
Item Included: 056454
Electrolytic Polisher *1 Power cord *1
Fuse *2
Notice
1.Limited stock, please purchase ASAP if you want it.
2.Before pickup, please call us to make sure.
3.The price will be adjusted when there's large fluctuations in exchange rates and raw material costs.
4.Advertising price does not include the tax.
Warehouse Address:
2220 Midland Ave., Unit 60AP (Administration Park)
Scarborough, ON M1P3E6
Business Hours:
Monday - Friday 9:00am - 4:30pm
Saturday & Sunday Closed
* For PICK UP, appointment by phone needed.
Tel: 647-350-2889 416-727-3877
https://asc365.com/newproductdetail.asp?productid=056454&typeid=2153
110V Dental Double Slot Electrolytic Polishing Machine Electrolytic Polisher 056454
-
Product Overview
This machine is used for oral orthosis and repair specialty. After sandblasting, the machine is used to electropolish the stainless steel or cobalt alloy castings such as denture bracket, crown bridge and clamp ring, so that the surface finish of the castings can meet the requirements. Can also be used for special crafts metal casting processing. The machine is compact in design, beautiful in appearance, small in size, easy to place, using double cylindrical electrolytic cell, working at the same time, high efficiency, suitable for electrolytic polishing of castings at different angles. The cathode of the machine is cylindrical, the anode is V-shaped bracket, and the bracket is equipped with alligator clipping casting. The timing switch controls the electrolytic polishing time, and the electrolytic polishing current can be continuously controlled.
Product Parameters
Voltage: 110V
Power: 250W
Average anode current: Constant current adjustable
Dc output voltage: 0-20V
Time range: 0-15min
Electrolytic cell capacity: 800ML
Package size: 18.9"*13.78"*11.81" (48cm*35cm*30cm)
Net weight/Gross weight: 17.75LB(8.05KG) / 20.94LB(9.5KG)
Product Features & Advantages
1. Electrolytic Cells:
This machine is equipped with two electrolytic cells can be cleaned, two anodes, can be used at the same time, improve the efficiency, convenient and practical.
2. Vent Hole:
There are a large number of vents on the back of the machine, which can timely discharge the excess heat generated by the machine, prevent the temperature from being too high, and protect the machine.
3. Control Panel
LED digital tube display panel, intuitive display of time and current, simple and convenient operation, reading at a glance. The working time and current can be appropriately adjusted according to the size of the workpiece.
4. Support Legs
Four rubber support legs at the bottom, which are non-slip, wear-resistant, good silence, can ensure the stability of the machine, and can prevent water from entering the machine from the bottom.
- The output voltage of the machine is stable, controlled in the best range, and the current distribution is uniform, which can effectively avoid excessive electrolysis Influence on the size of the workpiece.
- It can effectively protect the electrolyte, prolong the service life of the electrolyte and reduce the cost.
- The current can be controlled to completely avoid the situation of frequent fuse burning and component burning caused by the rising current of traditional electrolysis machine.
- Select precision potentiometer, adjust current more accurately.
- With overload, overheating protection function, longer service life.
Operating Instructions
1. Pour the electrolyte into the electrolytic cell, and fix the electrolytic tile (cathode) by both ends of the electrolytic cell.
2. Clamp the bracket (workpiece) with the clamp (anode), the workpiece should be connected with copper wire hanging, put into the electrolyte, pay attention to not contact with the electrolytic tile.
3. Set the working time and adjust the current according to the size of the workpiece, it is recommended to use high current to quickly deal with the surface, and then reduce the current to increase the brightness of the mirror.
4. After setting time is over, take out the bracket (workpiece) and rinse it with water.
Item Included: 056454
Electrolytic Polisher *1 Power cord *1
Fuse *2
Notice
1.Limited stock, please purchase ASAP if you want it.
2.Before pickup, please call us to make sure.
3.The price will be adjusted when there's large fluctuations in exchange rates and raw material costs.
4.Advertising price does not include the tax.
Warehouse Address:
2220 Midland Ave., Unit 60AP (Administration Park)
Scarborough, ON M1P3E6
Business Hours:
Monday - Friday 9:00am - 4:30pm
Saturday & Sunday Closed
* For PICK UP, appointment by phone needed.
Tel: 647-350-2889 416-727-3877
https://asc365.com/newproductdetail.asp?productid=056454&typeid=2153
When you call, please mention you found this ad on OKZ.ca
$345
Promotion Dental 2 Slot Electrolytic Polishing Machine 056454
User
Email Verified
Feb 2018
Member Since
192990
Listings
~2 hrs
Response
Safety Tips
- Meet in a public place
- Never send money in advance
- Inspect item before paying
- Trust your instincts
