Yorkville Nx55P Powered Loudspeaker 550 Watts 12-inch Woofer

Description
$1000

Yorkville Nx55p NX Series Powered Loudspeaker - 12 inch Woofer - 550 Watts

The NX55P active speaker enclosure uses a combination of amplifier technologies to create the best combination of lightweight enclosure and high-quality sound. Capitalizing on the already popular NX35's molded cabinet technology and a totally re-engineered switching power supply, the 550-watt (program) bi-amped NX55P weighs in under 50 lbs (19 kg)... the lightest in its class by a long shot.

Like all NX series enclosures, the NX55P is manufactured using tough, lightweight low low-resonance variable-density composite materials. In addition, they are UV and moisture resistant. The NX55P enclosure itself has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays or for use as a monitor. An improved wedge monitor angle has been incorporated into the new design.
The horn amplifier uses a two-tier class H linear technology, allowing the horn to produce loud, clean transients to keep up with the high output of the woofer. The two-tier amplifier technology is a lower-weight, more efficient amplifier with higher headroom and lower operating temperature. It is a perfect solution for powering the top end.

The NX55P can easily be used in any orientation, and close to walls, floors, and in close arrays with multiple cabinets. Particular care was taken in designing the components to reduce extraneous heat production.
The NX55P has a versatile direct input system and built-in mixer. The mixer allows the loudspeaker to be used directly with a microphone and/or line source. The loop output allows additional active cabinets to be driven from one cabinet's mixer stage, or a series of cabinets to be driven from one source. If desired, the end user can combine multiple NX55Ps using the mixer inputs on each cabinet and coupling the loop outputs. In this simple example, you would have the ideal presentation system with two microphone inputs and two line inputs.

The microphone input has equalization and high-pass filtering appropriate for vocal applications. The trim control allows looped cabinets to be individually adjusted in level. The NX55P has user-defeatable 100Hz high-pass filters that allow either cabinet to be used more efficiently with any Yorkville active subwoofer.
The NX55P enclosure itself has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays or for use as a monitor cabinet with well-protected inputs and controls.
We've also found an opportunity to tweak the electronics for maximum overall speaker performance and protection. Borrowing some ideas from our powerful and popular TX Series PA systems, the limiters used in the input and crossover stages are a complex combination of gain reduction and sweeping filters. As the NX55P is being pushed to its maximum input/output levels, its advanced filtering begins rolling off unnecessary subsonic frequencies.

The filter has remarkable response times (less than 70ms), allowing the system to constantly return itself to make sure the output is as clean, as loud, and as clear as possible at any given moment. This is achieved without negatively affecting the overall sonic quality of the cabinet. This ensures that the essential part of any mix, like the vocals or solo instruments, comes out clean and clear at the extremes of power and woofer excursion. Extremely fast and accurate limiting is in place to protect the speaker components.
The NX55P has a built-in mixer that allows the loudspeaker to be used directly with a tuned microphone and/or line sources such as a mixer, CD player, or laptop computer. The loop output allows additional powered cabinets to be driven from one cabinet's mixer stage, or a series of cabinets to be driven from one source. If desired, the end user can combine a pair of the NX55P's using the mixer inputs on each cabinet and coupling the loop outputs. In this simple example, you would have the ideal presentation system with two microphone inputs, two line inputs optimized for CD, cassette, or laptop computer audio source, complete within two speaker cabinets. Many NX55Ps can be linked together, but a maximum of three "mixers" can be active at any one time. (Making three mic sources and six line sources available in any three or more cabinet array). The microphone input has equalization and high-pass filtering appropriate for vocal applications. The trim control allows looped cabinets to be individually adjusted at different levels. This is valuable in applications where large numbers of cabinets are used, such as clusters or in trade show applications. The NX55P has a selectable two-position high-pass filter to limit extraneous low-frequency rumble or to crossover at the input so the loudspeaker can easily and effectively be used with subwoofers from a single full-range source. Engaging the high-pass filter also makes the NX55P a more efficient and effective vocal monitor.

The NX55P is an ideal loudspeaker for mobile presentation PA where high volume and superior sound quality are required. Multiple loudspeakers can easily be linked using mixer inputs from each loudspeaker to create a six-input system... no external mixer required. (Up to three "mixer" sources can be used in any one system.)

Features
• Integrated 1200 Watt Amplifier (Peak - 550 Watts Program)
• Max SPL 131dB Peak (125dB Continuous)
• Dual-purpose full range and wedge monitor format enclosure
• Ultra-clear reproduction throughout the bandwidth
• Lightweight, high-efficiency, high-tech bi-amped power module
• Proven TX-style processing and component protection
• /- 6dB input trim control for individual cabinet-level adjustment
• XLR and TRS inputs/outputs for easy connection and looping
• Multi-input source mixer for direct inputs
• Direct microphone input with level control
• Two-way overall EQ controls
• High quality 1" High Frequency driver
• Next generation woofer/driver/horn technology
• Integrated flying hardware (1/4" threaded holes)
• Tough, full-length metal grille
• Recessed Mixer panel
• Made in Canada

Used Yorkville NX55P Powered Speakers at reverb.com: C$1,228.58 C$36.14 Shipping
https://reverb.com/ca/item/711845-yorkville-nx55p-550-watt-12-powered-speaker

Price for the pair: $1,000.00 CASH FIRM
When you call please mention you found this ad listing on OKz.ca

Contact Information

Contact Person:Alex
Address:Edmonton, AB T5Y 2M1
City:Edmonton
Phone:780-719-XXXX (Show)
Asking Price:$1000

Other Information

For Sale By:Owner

Related Listings

Epic EL212A Legend Series Powered Speaker

Epic EL212A Legend Series Powered Speaker

$175 | Edmonton

Address: Edmonton, AB T5Y 2M1, Edmonton

KORG DT-1 PRO Digital Tuner

KORG DT-1 PRO Digital Tuner

$160 | Edmonton

Address: Leduc, AB T9E 0M2, Edmonton

Behringer Europower EP4000 4000-Watt Stereo Power Amp

Behringer Europower EP4000 4000-Watt Stereo Power Amp

$500 | Edmonton

Address: Edmonton, AB T5Y 2M1, Edmonton

PA DJ Sound System

PA DJ Sound System

Contact for price | Edmonton

Address: Edmonton, AB T5Y 2M1, Edmonton

Epic EL212A Legend Series Powered Speaker

Epic EL212A Legend Series Powered Speaker

$200 | Edmonton

Address: Edmonton, AB T5Y 2M1, Edmonton


Alex

On OKz since February, 2018

780-719-XXXX


Posted on: 21/04/2025 @ 07:51 am

Copyrights © 2025 OKZ.CA all rights reserved.