NSS Wrangler 2016B floor scrubber features a 20" scrubbing path, tight turning radius & rugged polyethylene construction. The quieter operation means extended use in work environments. (4) 12V 225 AH batteries & 115V charger, 16-gallon solution Tank, and a 17-gallon recovery tank.
The wheel-drive unit features twist-grip propulsion.
The built-in battery tray drain permits quick clean-up in case of battery acid spills.
The 32" wide urethane squeegee picks up in forward and reverse.
Mid-mounted wheels provide superior maneuverability and a tight turning radius.
The percolator helps break down recovered foam that might otherwise damage the vacuum motor.
The polyethylene body is non-corrosive and will withstand the toughest professional use.
The solution-fill port is now on the outside of the Wrangler 2016 - no need to open up the machine to add the solution. Since the fill port and drain hose are both in the front of the unit, there is no need to jockey the machine around in the janitor's closet.
A powerful 3/4 HP gear motor rotates the scrub brush at a steady 200 RPM. A solenoid automatically shuts off the solution flow when the brushes stop preventing accidental flooding during pauses in operation.
The scrub head tilts up for easy pad and brush changes. The scrub head is also offset for close edge cleaning.
Included is a wet pick-up kit. Connect the hose to your Wrangler 2016 and you are ready to vacuum those hard-to-reach areas, like corners where no automatic scrubber can go.
When not in use, the tube handle can be easily dismantled and stored right on top of the Wrangler for easy access.

Specifications
55"L x 21"W x 39.5" H
(4) 12V 225 AH batteries & 115V charger
Scrubbing Path: 20"
Squeegee Path: 32", swing-type
Vacuum Motor: 3-stage, bypass tangential discharge, 24V, .75 HP Closed Water Lift: 58"
Brush Drive Motor: Permanent magnet, gear motor, 24V, .75 HP Drive: Self-propelled through brush/pad
Construction: Rotocast Polyethylene body, mounted on steel frame
Wheels: (2) 8"x4" dia. W/slip grip tread
Caster: 4" dia 7x2" ball bearing swivel caster
Brush/Pad Speed: 200 RPM
Brush Pressure: Floating: 60 lbs.; Lock Down: 80 lbs.
Tool Kit: 2-pc wand w/7 ft hose, hose connector and 17" squeegee tool
Cleaning Rate Per Hour: Obstructed: 7,263 ft [2]; Unobstructed: 9,684 ft [2]
Run Time Per Charge: Up to 4.6 hours
Weight: Machine only: 177 lbs.; w/batteries & driver: 480 lbs.
Solution Tank: 16 Gal
Recovery Tank: 17 Gal.
When you call please mention you found this ad listing on OKz.ca