The HK490i, with its High Instantaneous Current Capability of 18 amps, will develop far more power under peak loads than its rated 30 watts per channel. In fact, the dynamic behavior approaches the ideal, in that the transient power nearly doubles into 4 ohms and nearly quadruples into 2 ohms. That means the HK490i gives you louder, clearer, cleaner sound than any other 30 watt receiver.

With its ultra wide band frequency response of 0.2Hz to 150kHz, the HK490i delivers very fast transient response, while virtually eliminating TIM distortion.

The tuner section shuts down when the phono or aux buttons are pressed, eliminating digital switching noise or the possibility of bleed through. There are also two tape monitors with copying ability and a subsonic filter.

The digitally synthesized quartz-locked tuner provides precise, drift-free reception. The display is DC driven, to eliminate switching noise and distortion. And an auto FM switch automatically shifts the tuner into mono mode when the signal is too weak for stereo reception.

For convenience, stations may be locked into one of the 8 AM and 8 FM memory presets. In addition, the auto-mode switch scans up or down to the next station automatically.

Specifications:

Tuning range: FM, MW
Power output: 30 watts per channel into 8Ω (stereo)
Frequency response: 0.2Hz to 150kHz
Total harmonic distortion: 0.08%
Input sensitivity: 2.2mV (MM), 135mV (line)
Signal to noise ratio: 80dB (MM), 83dB (line)
Channel separation: 45dB (MM), 45dB (line)
Dimensions: 443 x 134 x 365mm
Weight: 8kg
When you call please mention you found this ad listing on OKz.ca