The Arctic Liquid "Freeze" II 360 is a Liquid Cooling heatsink with compatibility for the following socket type:

AMD:
AM4

INTEL:
1700, 1200, 115x, 2011-3*, 2066*

Comes with motherboard and CPU Socket compatability mounts, braces, spacers Etc. for CPU adaptability with different socket types. Fits most I5's, I7's and Ryzen series CPU's.

Features 3 fans, Liquid pump, Liquid tubing and radiator.
I bought this item when it was first released by PCPartsCanada for a little over $200 but didn't end up using it as I ended up going with a new AM5 socket set to be abl to utilize DDR5 ram and the Ryzen 9 7700X3D,

FULL SPECIFICATIONS:

TPD of the Power Supply is under 3 Watts,
(0.5 W to 2.7 W max to be precise)

Tube length of 18"/45cm, best for Medium, Small and Micro ATX sized cases, Can still be utilized in a Large/70 litre volume case with mounting backet adaptability for whatever your setup may be.

DIMENSIONS:
Fan Heatsink/Radiator Dimension's are:
398mm(L)
38mm(W)
120mm(H)
CPU Cold Plate | Pump Dimension's are:
78(L),
53(W)
98(H)

Total weight of the aRCTIC Liquid Cooler ii 360 including tubes and interchangeable radiatotor/heatsink is 1,687g

COMES WITH THERMAL PASTE FOR INSTALLATION!

Fan Speed: (Controlled by PWM(: 200 - 1800 RPM @ noise level of "0.3 sone"

Motherboard Input: Same 4-Pin Connector your motherboard has a minimum of 1-2 power Connector's labeled as "CPU Fan (0/1)", "CPU Fan_2"

Included are the following parts:
x4 Backplate Nuts
x4 Rubber O-Rings
x30 Screws
x4 thumb nuts
x8 Standoffs
x24 Flat Washers
x4 Mounting Clips
x4 Spacers
x1 tube w/ 0.8g of MX-5 thermal Compound

[x1 Liquid Cooling Pump, x3 PWM Fans, x1 BackPlate]

I have a Ventus GTX OX 1660 SUPER OC w/6GB VRAM for grabs here:


As well as an ASRock B360m Motherboard (LGA 1700) with a 9400f Intel I5 and a 650W PSU and x1 | 8gb DDR4 (x4 slot capacity) here:
When you call please mention you found this ad listing on OKz.ca