For sale a Victor / JVC model QL Y66F - fully automatic direct drive quartz lock turntable in excellent, very clean condition.

Everything works properly on this machine, including all automatic functions. Turntable comes with working Pioneer cartridge.


Description (from website):

This is a full-auto player that pursues sound quality equivalent to that of manual machines.

For the turntable, diameter 35 cm, weight 2.9 kg (including mat), inertial mass 560kg-cm2As a result, the inertia mass is increased by more than 30% compared to a 30 cm diameter turntable with the same weight and shape, and basic rotational performance is improved.

A magnetic support DD motor is used to reduce the bearing load and friction caused by the heavy turntable, as well as the downward force caused by the rotor magnet.
In the magnetic support system, the rotor is located below the rotor yoke and the suction force is applied upward. As a result, the bearing load is reduced to about 1/10 of that of the conventional system, to only about 500g, thus reducing noise and wear caused by bearing friction.

An ED (electro dynamic) servo arm is used for the tone arm.
The ED servo tone arm is an electronic Q damping arm that detects vibration of the arm by two pairs of coreless linear motors directly connected to horizontal and vertical bearings, and cancels the vibration by generating inverse torque by feedback control of a microcomputer. This suppresses needle skipping and intermodulation distortion induced by low frequency resonance. In addition, full automatic operation is possible without touching the arm body by volume and button operation.
In addition, manual operation is also supported and the arm can be moved by hand.


Specifications:

Motor: coreless DC, quartz FG servo motor

Drive system: direct drive

Speed detection system: frequency generator

Servo system: bi-directional servo quartz lock

Wow and flutter: 0.015% WRMS

Signal to noise ratio: 80dB

Speed deviation: 0.002%

Platter: 2.9kg 350mm diecast aluminium

Tonearm: straight or s-shaped arm pipe

Effective length: 254mm

Overhang: 15mm

Tracking force: 0 to 3g

Dimensions: 495 x 187 x 405mm

Weight: 12.3kg


Please check my other ads, I have many high end amplifiers, turntables, tonearms, headshells, cartridges and some other quality vintage electronics. Also have many parts for vintage Dual turntables (dust covers, spindles, weights, headshells, adapters...)


Vlad
416-831-1357
When you call please mention you found this ad listing on OKz.ca