with THREE CUT-OFF Lengths: 0.25mm, 0.80mm and 2.50mm

to meet your special needs like testing O-ring Groove or Beveled edge
(Similar Pocket Surf III has ONLY ONE cut-off of 0.8mm/0.030in)

MI Profilo is a portable, battery-powered instrument for checking surface roughness with the measured values displayed on a digital readout. The instrument can be used in the laboratory, inspection area, in the shop, or wherever on-site surface roughness testing is required.



Highlighted Features:

Feature packed, compact and economically priced

For a wide variety of surfaces measurments including flat, inside/outside diameters,groove bottom and many difficult to gage surfaces

THREE CUT-OFF Lengths: 0.25mm, 0.80mm and 2.50mm

For versatility it operates in four probe positions —extended, closed, or with the probe at 90 °,180 ° or 270 °

Parameters
Ra: Average Roughness
Ry: Maximum Roughness Depth
Rmax: Maximum Roughness Depth (DIN)
Rz: Mean Roughness Depth

Meets ISO, DIN Specifications

Convenient digital display located on the top

Easy to read LCD readout

Roughness in microinches or micrometers


SPECIFICATIONS:

Measuring parameters and ranges:
Ra: 0.05um to 5.0um (2u" to 200u")
Rz/Ry: 0.2um to 25.0um (8u"to 999u")

Display Resolution: 0.01um (1u")

Cut-offs (c): 0.8mm/0.03", 0.25mm and 2.50mm

Traverse Lengths and Evaluation Lengths when 0.8mm cutoff is used:

Traverse Length

Evaluation Length

Number of cut-offs/ switch position: 1.2mm, 3mm, 4.5mm

System error: ±10%

Random error: <2%

Probe Type: Piezoelectric

Display: 3-digital LCD

Power: 9-volt consumer-type alkaline battery

Contents

MI Profilo main unit
General purpose probe (installed)
Reference specimen (calibration standard, in Ra) built-on a riser plate
9-volt Alkaline Battery (installed)
Small screwdriver (to adjust read-out during calibrating)
Operation Manual in English
Carrying Case
When you call please mention you found this ad listing on OKz.ca