WALKIE-TALKIE | TWO-WAY RADIO | WIRELESS WALKIE-TALKIE | 2 WAY RADIO | WIRELESS

CALL OR TXT / APPELLER OU TEXTER:
PLATEAU MT-ROYAL (Montreal) =514-664-0231
SAINT-CONSTANT (South Shore) = 438-505-2520

I AM AVAILABLE AT ALL THESE PLACES PLATEAU MT-ROYAL (Montreal) SAINT-CONSTANT (South Shore)

I AM AVAILABLE AT ALL THESE LOCATIONS PLATEAU MT-ROYAL (Montreal) SAINT-CONSTANT (South Shore)

✪✪✪✪✪✪✪✪✪✪✪✪✪

IMPORTANT VOIR NOS AUTRES OFFRES.

Copiez ce lien dans votre barre d'adresse :
www.OKz.ca/b-ville-de-montreal/514-664-0231/k0l1700281

IMPORTANT SEE OUR OTHER OFFERS.

Copy this link into your address bar:
www.OKz.ca/b-ville-de-montreal/514-664-0231/k0l1700281

✪✪✪✪✪✪✪✪✪✪✪✪✪

ENGLISH DESCRIPTION

The Federal Signal PA300 siren offers exceptional value, proven durability, unmatched reliability and is recognized worldwide as the industry standard. This totally enclosed and fully equipped siren will work from any 12 volt negative ground vehicle electrical system. The PA300 can be powered directly from the vehicle battery or from secondary power distribution centers. Regardless of how power is supplied, the siren is protected against most failure modes, including reverse polarity, by a readily available fuse that can be replaced without tools.

A wide range of features come standard with all PA300 series sirens. Included are 5 basic siren tones, TAP II (horn to ring transfer), PA, radio replay and air horn sound with priority siren. TAP II enables efficient traffic clearing capability at intersections without taking your hands off the wheel or your eyes off the road. There is also a "Press-and-Hold" function, pressing and holding the horn ring will produce an alternate sound for as long as the operator holds the horn ring circuit. The siren's PA volume level can be controlled with a rotary GAIN switch located on the unit's backlit front panel, and the radio retransmission volume is adjustable via an easily accessible rotary pot.

FEATURES Full-featured siren in a compact housing Easy-to-use, durable switching Built-in noise-canceling microphone Illuminated, anti-glare control panel 100 or 200 watt models available External PA gain control Easily accessible fuse protection Effective TAP II intersection clearance Priority in place hi-lo tone available SAE/Class A compliant with (1) 100 watt speaker 12 or 24 volt versions available Three year warranty FEATURES

Approvals: Meets SAE J1849 requirements for audible output Class A Compliant (CAC) Voltage: 11-15 or 24-28; Model 690009 - 24V Standby current: 70mA Operating current: 12V - 20 amps max; 24V - 10 amps max. Operating temperature range: -30°C to 65°C Dimensions (H x W x D): 2.3 in (5.9 cm) x 6.1 in (15.6 cm) x 7.6 in (19.4 cm) Shipping weight: 6.50 lbs.

INSTALLATION PA300 Siren Assemblies are built small and compact measuring only 2.3"Hx6.1"Wx7.6"D and each unit is supplied with its own "U" shaped mounting bracket. has no protruding components to interfere with mounting arrangements and all electrical connections are easy to install plug-and-play types which are located at the rear of the siren housing. is available for flush mounting and a wide variety of switch controls that mount flush to the PA300.

RADIO SELECTOR FUNCTIONS - Incoming radio messages are amplified by the siren and rebroadcast on the external loudspeaker. MANUAL - The siren can be activated by the HORN/SIREN switch or the sound of the vehicle's horn. WAIL - continuous "moans" up and down. YELP - Fast, continuous "chirping" tone. HI-LO - Distinctive two-tone sound. PRIORITY - Easily recognizable quick Yelp tone. HORN-SIREN - Up position activates electronic air horn sound and down position activates peak and hold sound in any mode except radio.

FRANÇAIS DESCRIPTION

The Federal Signal PA300 siren delivers exceptional value, time tested durability, unmatched reliability, and is recognized worldwide as the industry standard. This totally enclosed, fully featured siren will operate from any 12-volt negative ground vehicle electrical system. The PA300 can be powered directly by the vehicle's battery or through secondary power distribution centres. No matter how power is delivered, the siren is protected against most failure modes, including reversed polarity, by a fuse that is readily available and can be replaced without tools. The PA300 series of sirens can provide either 100-watt standard or 200-watts (special order with additional cost) output and will meet or exceed SAE J1849 and Class A requirements for sound when paired with a Federal Signal high-power speaker.

A wide range of features comes standard with any PA300 series siren. Included are 5 basic siren tones, TAP II (horn-ring transfer), PA, radio rebroadcast, and air horn sound with siren override. TAP II allows for effective intersection traffic clearing capability without removing your hands from the steering wheel or your eyes from the road. There is also a "Press-and-Hold" function, depressing and holding the horn ring will produce an alternate sound for as long as the operator keeps the horn ring circuit depressed. The siren's PA volume level can be controlled with a rotary GAIN switch located on the unit's backlit front panel, and radio rebroadcast volume is adjustable via an easily accessible rotary pot.

FEATURES Full-featured siren in compact package Easy-to-operate and durable switching Built-in noise canceling microphone Illuminated non-glare control panel 100- or 200-watt models available External PA Gain control Easily accessible fuse protection Effective TAP II intersection clearing Priority in place of hi-lo tone available Meets SAE/Class A with (1) 100-watt speaker 12 or 24 Volt versions available Three-year warranty SPECIFICATIONS

Approvals: Meets SAE J1849 requirements for sound output Meets Class A (CAC) Voltage: 11-15 or 24-28; Model 690009 - 24V Standby Current: 70 mA Operating Current: 12V - 20 amps max; 24V - 10 amps max. Operating Temperature Range: -30° C to 65° C Dimensions (H x W x D): 2.3 in (5.9 cm) x 6.1 in (15.6 cm) x 7.6 in (19.4 cm) Shipping Weight: 6.50 lb

INSTALLATION PA300 siren packages are built small and compact measuring only 2.3"Hx6.1"Wx7.6"D and each unit comes supplied with its own "U" shaped mount bracket. There are no protruding components to interfere with mounting arrangements and all electrical connections are easy "plug-and-play" type which are located on the rear of the siren's housing. An optional stainless steel bezel is available for flush mounting and a wide variety of switch controls that flush mount to the PA300.

SELECTOR SWITCH FUNCTIONS RADIO - Incoming radio messages are amplified by the siren and rebroadcast over the outside speaker. MANUAL - Siren may be activated by the HORN/SIREN switch or the vehicle's horn ring. WAIL - Continuous "wailing" up and down in pitch. YELP - Continuous rapid "warbling" tone. HI-LO - Distinctive two-tone sound. PRIORITY - Easily recognized rapid Yelp tone. HORN-SIREN - Up position activates electronic air horn sound and Down position activates peak-and-hold sound in any mode except radio.

CALL OR TXT / APPELLER OU TEXTER:
PLATEAU MT-ROYAL (Montreal) =514-664-0231
SAINT-CONSTANT (South Shore) = 438-505-2520
When you call please mention you found this ad listing on OKz.ca